1.氟碳面漆 Fluorocarbon finishProduct Instruction Manual

DreamDur 22F：It is a two component fluorocarbon resin topcoat with excellent light and color retention performance, which meets the requirements of the railway steel bridge protective coating standard TB/T 1527-2004 and the cross-linked fluororesin coating standard HG/T 3792-2005

氟碳面漆 Fluorocarbon finish is one of the most widely used products in industrial anticorrosion. It is suitable for steel rust prevention in atmospheric environment, and is widely used in general anticorrosion, chemical atmosphere, Marine environment and other anti-corrosion and weathering environment.氟碳面漆 Fluorocarbon finishis excellent in rust resistance, adhesion, mechanical properties and supporting properties.

DreamDur 22Fis a two-component coating, component A is composed of resin, filler, pigment, additives, solvent, etc., and component B is a curing agent.

2. Main application

氟碳面漆 Fluorocarbon finishpaint is suitable for atmospheric environment, steel components antirust primer, especially in harsh Corrosion Environment, or medium and long term weather resistance demand.氟碳面漆 Fluorocarbon finishSpecific applications in: bridge anti-corrosion, steel structure anti-corrosion, mechanical equipment coating, construction coating, vehicle protection, engineering anti-corrosion.

3. surface preparation

In sprayingDreamDur 22F Before，completely remove the oil, rust and oxide skin on the substrate surface to reach the Sa 2.5 standard, roughness reaches 30-70 μ m; roughness reaches 30-70 μ m. After the surface treatment, the primer should be applied within 4 hours to prevent the substrate from rust again.

4. construction technology

There are many氟碳面漆 Fluorocarbon finishkinds of brushing methods, you can choose spraying, brushing, rolling coating, use different brushing methods, pay attention to the viscosity of the coating, with diluent to mix the coating, and pay attention to the amount can not be too much, so as not to affect the coverage of the coating.

5. Construction environment

To get a better氟碳面漆 Fluorocarbon finishpaint film,requirements in the brush, also need to pay attention to the environment, especially pay attention to the temperature change, and if the temperature changes too fast, it is easy to affect the performance of the paint film, so pay attention to the lowest temperature in 5℃, and the highest requirements can not exceed 50℃, affect the performance of the paint film. In addition, when brushing, pay attention to the humidity in the air, can not exceed 75%, so as not to affect the performance of the paint film.

6.DreamDur 22FProduct description for download

Check the instructions

7.Welcome to orderDreamDur 22F

We expect that in the future development process, products and services will be recognized by everyone, at the same time, establish a good Corporate Culture and social responsibility, create excellent value for employees and customers, for the society, the environment. In the future, we will always stay true to our original aspiration, forge ahead, continue to focus on the field of industrial anticorrosion, and strive to become a "trustworthy partner" in the eyes of customers. Protect your assets and enhance the value of your products through our professional and diversified services.

Service phone number: 7x24 hours:400-878-0506